1. HDBaseT Transmission
Transmits uncompressed video, multi-channel digital audio, and control signals over a single network cable with zero latency.
Transmits uncompressed 4K60 Ultra HD video, multi-channel audio, bidirectional IR, and RS-232 up to 120m over a single Cat6 network cable with near-end HDMI loop out and single-sided PoC power.
HDMI 2.0 · HDCP 2.2 · YUV 4:4:4 · 18Gbps · HDR10+ / Dolby Vision · 150m at 1080P · 3.5mm Audio De-embedding
PANIO · Technology from Taiwan
PANIO HD6000K is a commercial-grade 4K 60Hz HDMI 2.0 18Gbps HDBaseT Extender designed for mission-critical command centers, professional meeting rooms, auditoriums, and digital signage installations. It extends uncompressed 4K@60Hz (YUV 4:4:4) Ultra HD signals up to 120 meters (394 ft) and 1080p@60Hz signals up to 150 meters (492 ft) over a single Cat6/Cat6a cable with zero latency and pixel-accurate transmission.
The transmitter unit integrates an HDMI local loop-out port for near-end confidence monitoring, while the receiver unit features an independent 3.5mm stereo audio de-embedding port for direct amplifier connection. Featuring unilateral PoC (Power over Cable), a single 24V power adapter powers both units. Full pass-through support for bidirectional IR, RS-232 serial control, and HDMI CEC delivers seamless automation and integration.
Watch the HD6000K in action: uncompressed 4K60 HDBaseT long-distance transmission, near-end HDMI loop out, and independent audio extraction.
Engineered for rock-solid stability, zero latency, and seamless room integration across enterprise AV installations.
Transmits uncompressed video, multi-channel digital audio, and control signals over a single network cable with zero latency.
Full 18Gbps bandwidth supporting 3840×2160@60Hz, YUV 4:4:4, HDR10+, HLG, and Dolby Vision for stunning visual fidelity.
Transmits up to 120m at 4K 60Hz and 150m at 1080P 60Hz over Cat6/Cat6a cabling without signal degradation.
Transmitter features 1x HDMI local loop-out port for instant confidence monitoring at the source location.
Receiver unit extracts PCM 2.0 audio via 3.5mm stereo jack, enabling direct feed to external audio amplifiers.
Power over Cable enables a single DC 24V adapter at the TX to power the remote RX unit over the Cat6 cable.
Full pass-through for wideband IR signals and 3-pin Phoenix RS-232 serial commands for automation integration.
Passes Consumer Electronics Control (CEC) commands, allowing unified remote control across linked AV devices.
Severe signal degradation beyond 5–10 meters at 4K60 resolution. Heavy, rigid cables are prone to connector strain, cannot fit narrow conduits, and lack PoC, requiring AC power outlets everywhere.
Zero-latency uncompressed 4K60 4:4:4 transmission up to 120m over flexible, cost-effective Cat6 cable. Features single-sided PoC power, local HDMI loop-out, and built-in audio separation.
Requires only one DC 24V adapter connected to the TX unit, dramatically simplifying remote display mounting in ceilings and video walls.
Built-in ±8kV air-gap and ±4kV contact discharge electrostatic protection safeguards expensive source and display equipment.
Ensures immediate source-to-display handshake compatibility, preventing resolution mismatch, black screens, or color distortions.
Tailored for professional B2B installations requiring reliable continuous operation and high-definition extension.
Extend presenter laptops from podiums across 100+ meters to ceiling projectors with synchronous podium confidence display.
Keep heat-generating servers and workstations safely in server racks while extending uncompressed 4K60 video to console screens.
Feed high-impact 4K60 video and independent background music to public displays in malls, transit hubs, and hotel lobbies.
Send teaching PC video to large auditoriums with simultaneous local monitor output and bidirectional IR for podium control.
Conceal media players in central control racks and power remote display panels over lightweight Cat6 with single-point PoC.
Zero-latency uncompressed 4K60 4:4:4 transmission ensures surgical and diagnostic visuals remain crystal clear across operating rooms.
| Specification Category | PANIO HD6000K Parameters |
|---|---|
| VIDEO & TRANSMISSION | |
| Product Model | PANIO HD6000K |
| Transmission Technology | Uncompressed HDBaseT over single Cat6/Cat6a cable |
| Maximum Resolution | 4K@60Hz (3840×2160@60Hz, YUV 4:4:4, 8-bit), HDR10+, HLG, Dolby Vision |
| Bandwidth | 18Gbps (HDMI 2.0 / HDCP 2.2 and HDCP 1.4 compliant) |
| Transmission Distance | Up to 120m (394ft) at 4K@60Hz; up to 150m (492ft) at 1080P@60Hz |
| Recommended HDMI Cable | Up to 5 meters certified Premium High-Speed HDMI 2.0 cable on input & output |
| CONNECTIVITY & AUDIO | |
| Transmitter (TX) Ports | 1 × HDMI IN, 1 × HDMI OUT (Local Loop), 1 × HDBT OUT (RJ45), 2 × IR (IN/OUT), 1 × RS-232, 1 × DC 24V Jack |
| Receiver (RX) Ports | 1 × HDBT IN (RJ45), 1 × HDMI OUT, 1 × 3.5mm Audio OUT, 2 × IR (IN/OUT), 1 × RS-232 |
| HDMI Audio Formats | LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus (DD+), DTS-ES, DTS-HD Master Audio, DTS:X |
| De-embedded Audio Format | Analog Stereo PCM 2.0 (via RX 3.5mm jack) |
| CONTROL & COMPLIANCE | |
| IR Pass-Through | Bi-directional wideband IR transmission (IR IN & IR OUT on both units) |
| Serial Pass-Through | 1 × RS-232 via 3-pin Phoenix connector on both TX & RX units |
| CEC Function | Pass-through support for HDMI Consumer Electronics Control |
| EDID Management | Automated display EDID pass-through and handshake management |
| ELECTRICAL, MECHANICAL & ENVIRONMENTAL | |
| ESD Protection | Human Body Model: ±8kV (Air-gap discharge) & ±4kV (Contact discharge) |
| Power Supply | DC 24V/1A with unilateral PoC (Power over Cable from TX to RX) |
| Dimensions (L × W × H) | Transmitter: 140 × 65 × 18 mm / Receiver: 140 × 65 × 18 mm |
| Unit Weight | Transmitter: 160g / Receiver: 155g |
The HD6000K extends 4K@60Hz (YUV 4:4:4, HDR10+) signals up to 120 meters (394 ft) and 1080p@60Hz signals up to 150 meters (492 ft) over a single standard Cat6/Cat6a cable with zero latency.
HD6000K features unilateral PoC. Connecting the single DC 24V/1A power adapter to the transmitter unit simultaneously powers the receiver unit across the Cat6 cable, eliminating the need for an AC power outlet at the display side.
Yes. The transmitter (TX) unit includes a local HDMI loop-out port alongside the HDBaseT RJ45 output, allowing near-end monitoring while simultaneously transmitting to the remote receiver (RX) screen.
We recommend a certified standard Cat6 or Cat6a solid copper cable with full 8-core termination (T568B standard). Shielded STP/FTP cabling is recommended in high-EMI industrial environments.
Yes. The receiver (RX) unit features a dedicated 3.5mm stereo mini-jack for de-embedded PCM 2.0 analog audio, enabling direct connection to active speakers, sound bars, or commercial amplifiers.
PANIO is an established Taiwanese engineering brand. 'Technology from Taiwan' reflects PANIO's rigorous hardware design standards, high-reliability components, secure safety grounding, and direct factory technical support.
Explore other commercial HDMI 2.0 splitters, matrices, and presentation switchers with integrated HDBaseT extension.
1 in × 4+1 out 4K 60Hz HDMI 2.0 Splitter & Extender with HDCP 2.2, PoC, RS-232, Bi-directional IR, and Audio de-embedding.
4 in × 4+8 out 4K 60Hz HDMI 2.0 Matrix Switcher & Extender with HDCP 2.2, PoC, CEC pass-through, and RS-232 automation.
USB Type-C + VGA + HDMI inputs with 1+1 out 4K 60Hz extension, PoC, RS-232, Bi-directional IR, TCP/IP, and Mic mixing.